Grand Prairie, Texas
Complete Garage Remodel in Grand Prairie, TX
Short answer
Professional Garage Concepts remodels the whole garage in Grand Prairie, Texas under one contractor: floor coating, new door and opener, cabinets, slat wall and overhead storage. Floor-and-basics packages start at $5,500 to $9,000, and a full garage runs $12,000 to $22,000. One crew, one schedule, one warranty. Call (817) 381-6173.
Complete Garage Remodel for Grand Prairie homeowners
Grand Prairie stretches roughly 25 miles north to south and changes housing every few miles. Dalworth Park and the north side hold 1940s and 1950s cottages with detached garages, the central belt is 1970s and 1980s two-car brick, and Mira Lagos and Grand Peninsula on the south end are 2005-and-newer three-car homes near Joe Pool Lake.
We run both halves of the business out of this location. Homeowners walk in to compare Amarr sections and flake blends under real light, and the warehouses around us call for rolling steel and dock door service the same day.
Our showroom sits on Greenview Drive inside the Great Southwest Industrial District, one of the largest industrial parks in the country, with Lone Star Park and Traders Village a few minutes away.
- One contractor for the floor, the door, the storage and the finish work
- One schedule instead of four trades pointing at each other
- Showroom samples of the actual flake, cabinet and door finishes
What complete garage remodel involves
A complete garage remodel covers the whole room: the floor coating, the cabinets, the slat wall, the overhead racks, the lighting, the garage door, the opener, and on many DFW properties the driveway gate. This page explains how that job is scoped, sequenced, priced and warrantied when one contractor owns all of it.
Almost nobody in Dallas-Fort Worth sells it that way. The coating franchises do floors and storage but will not touch your door or your gate. The door companies do doors, sometimes gates, and will not pour, grind or coat concrete. So the homeowner becomes the general contractor by default, chasing four trades who each blame the one before them.
Professional Garage Concepts has been doing garage doors, gates, floor coatings, decorative concrete, cabinets and slat wall out of North Texas since 2001. Same company, same crews, same phone number when something needs a second visit. Come see it first: we run two showrooms, in Keller and in Grand Prairie, where you can put your hand on the actual door section, hold the actual flake blend, and look at a metallic pour under real light before you spend a dollar. Call (817) 381-6173 or book a design consultation.
What a Complete Garage Remodel Actually Includes
A garage makeover in Dallas-Fort Worth usually gets sold to you in pieces. Here is the full scope, priced and scheduled as one project, so you can decide what you want in phase one and what waits.
The Sequencing Problem Nobody Warns You About
The order of operations decides whether the garage looks built or looks assembled. Get it wrong and you pay twice.
The reason people call us instead of four companies
A garage redo normally means a coatings company, a door company, a cabinet company and somebody for the electrical, each with its own lead time and its own idea of who goes first. When the sequence slips, nobody owns it. We do the floor, the door, the opener, the storage and the finish work with one crew and one schedule, and the warranty has one name on it.
Sequence matters more than people expect
The floor goes down after the door is hung and after any electrical is roughed in, never before, or the new coating gets scarred by the trades that follow. Cabinets and slat wall mount after the coating cures. Overhead racks go up before the cars come back in. Getting that order wrong is how a floor that cost several thousand dollars ends up with drill dust ground into it in week one.
What the packages cover
Floor and Basics, at $5,500 to $9,000, is the coating plus a clean-up of the door, opener and lighting. A Full Garage, at $12,000 to $22,000, adds the new door, the opener, cabinet runs, slat wall and overhead storage. Full Property, from $25,000, extends the same treatment to the driveway, patio and any exterior concrete. Every one of them is quoted against your actual garage after a measure, not off a menu.
Straight pricing
Complete Garage Remodel pricing in Grand Prairie
These are planning ranges for a standard two-car DFW garage, not a quote. Slab condition, garage size, door size, cabinet run length and gate scope all move the number, and you get a firm written price for every line item before anything is ordered.
Floor and Basics
$5,500 to $9,000starting at
You want the room clean, bright and usable without touching the door
- Full-broadcast flake floor coating, roughly $2,200 to $4,500 for a two-car garage at $5 to $6 per sq ft
- Slab grind, crack repair and joint treatment
- One wall of PVC slat wall with a starter hook and basket set
- Two overhead racks lagged into ceiling framing
- LED lighting upgrade sized to the bay count
Full Garage
$12,000 to $22,000installed
The whole room done at once, including a new insulated door
- Everything in Floor and Basics, plus a powder-coated cabinet run with a work surface
- Slat wall across the working walls with the full accessory set
- New insulated Amarr double door, typical DFW double-door job around $4,500
- Insulation upgrade, $500 to $1,000 polystyrene or $1,000+ polyurethane
- New LiftMaster or Chamberlain opener, $150 to $350, plus $100 to $300 to connect it to the new door
Full Property
$25,000+starting at
Metallic floor, custom door, and a driveway gate on the same schedule
- Metallic epoxy floor system from $12 per sq ft, or polished concrete at $3.50 to $12 per sq ft
- Custom or carriage-house door, single $2,000 to $10,000+, double $3,500 to $20,000+
- Wall-mount jackshaft opener to clear the ceiling for overhead storage
- Driveway gate with a DoorKing or All-O-Matic operator, generally starting around $4,500
- Access control, safety loops and gate programming
Answers
Complete Garage Remodel in Grand Prairie: your questions
Still stuck? Call (817) 381-6173 and talk to someone who does this every day.
How fast can you get to Grand Prairie for complete garage remodel?
We run same-day service to Grand Prairie in most cases, and we are our Grand Prairie showroom is at 801 Greenview Dr, inside the city. Emergency calls are dispatched 24 hours a day. Call (817) 381-6173 and we will give you a real arrival window, not a vague promise.
Do you actually work in Grand Prairie, or just advertise there?
We work in Grand Prairie regularly and have since 2001. We run both halves of the business out of this location. Homeowners walk in to compare Amarr sections and flake blends under real light, and the warehouses around us call for rolling steel and dock door service the same day.
What does complete garage remodel cost in Grand Prairie?
Pricing in Grand Prairie matches our standard DFW pricing, with no travel surcharge. These are planning ranges for a standard two-car DFW garage, not a quote. Slab condition, garage size, door size, cabinet run length and gate scope all move the number, and you get a firm written price for every line item before anything is ordered. We confirm the exact number before any work begins.
Which Grand Prairie neighborhoods do you cover?
All of them. We work throughout Grand Prairie including Mira Lagos, Grand Peninsula, Dalworth Park, Westchester, and every ZIP in the city (75050, 75051, 75052, 75054). Dallas County is core territory for us.
How much does a complete garage remodel cost in Dallas-Fort Worth?
A complete garage remodel in Dallas-Fort Worth typically runs $5,500 to $9,000 for floor coating and basic storage, $12,000 to $22,000 for the full room including a new insulated door and opener, and $25,000 or more when a metallic floor, a custom door or a driveway gate is included. Slab condition and garage size move the number most. Every line item is priced separately in writing.
How long does a full garage transformation take?
Most complete garage remodels in Dallas-Fort Worth take five to ten working days on site, spread across two to three weeks so the floor coating can cure before cabinets, slat wall and the new door go in. Overhead work and lighting take a day, slab prep and coating take two, and storage, door and opener installation take two to three more.
Can one contractor really do the floor, the cabinets, the door and the gate?
Yes, Professional Garage Concepts installs garage doors, openers, driveway gates, floor coatings, decorative concrete, cabinets and slat wall with our own crews, which is unusual in Dallas-Fort Worth, where the coating franchises will not touch a door or a gate and the door companies do not coat floors. One scope, one schedule, one company to call afterward.
Why does the garage floor coating go in before the cabinets?
Coating the entire slab first gives you a continuous floor with no bare strips hidden behind cabinets, keeps concrete grinding dust out of new drawers, and lets you reconfigure the garage later without exposing raw concrete. Floor-standing cabinet feet are meant to sit on the finished surface, not be coated around.
Nearby
We also cover
Complete Garage Remodel in Grand Prairie, handled today
Call (817) 381-6173 or send the form. Same business day response, and no travel surcharge for Grand Prairie.