Dallas-Fort Worth metroplex
Garage Door and Floor Coating Service Area in Dallas-Fort Worth
Short answer
Professional Garage Concepts serves 39 Dallas-Fort Worth cities from showrooms in Keller and Grand Prairie. Garage doors, openers, floor coatings, driveway gates, decorative concrete and storage. No travel surcharge anywhere in the metroplex and 24/7 emergency dispatch. Garage floor coatings run $6 to $10 per square foot installed and most are finished in a single day. Call (817) 381-6173.
39 cities covered from two DFW showrooms.
Our showrooms
Keller showroom
220 N Main Street, Suite AKeller, TX 76248
Closest to: Keller, Southlake, Colleyville, Grapevine, Trophy Club, Fort Worth
(817) 381-6173Grand Prairie showroom
801 Greenview DrGrand Prairie, TX 75050
Closest to: Grand Prairie, Arlington, Mansfield, Irving, Cedar Hill, DeSoto
(817) 381-6173Primary markets
Cities with full service coverage
Arlington, TX
Tarrant County · 398,000
Two very different jobs run side by side here. North Arlington homes need one-piece tilt-up doors converted to insulated sectional doors with new track, while the subdivisions south of I-20 are on their second round of spring and roller failures.
Dallas, TX
Dallas County · 1,300,000
Alley-load garages are their own trade. Older detached structures have out-of-square openings and settled slabs, so a new door usually needs the jamb rebuilt and the track shimmed before anything hangs plumb and rolls quietly.
Fort Worth, TX
Tarrant County · 1,000,000
Two jobs dominate Fort Worth. Fairmount and Ryan Place need carriage-style doors built to non-standard 1920s openings, and the Alliance-area builder doors installed from 2005 to 2012 are on their second set of springs and their first opener replacement.
Frisco, TX
Collin County · 230,000
Builder-grade springs are failing across Frisco at the same time. A 10,000-cycle spring installed in 2006 runs out its life around year 7 at four cycles a day, and thousands of doors crossed that line in the same stretch. We size replacements at 25,000 cycles so the next one is 20 years out.
Grand Prairie, TX
Dallas County · 200,000
We run both halves of the business out of this location. Homeowners walk in to compare Amarr sections and flake blends under real light, and the warehouses around us call for rolling steel and dock door service the same day.
Irving, TX
Dallas County · 256,000
Valley Ranch alley-load garages need a different approach. There is no room to stage a truck in front of the door and the alley turning radius is tight, so we stage sections and hardware differently than on a front-load street.
Keller, TX
Tarrant County · 45,000
Keller homeowners can touch the door before they buy it. We keep Amarr sections, LiftMaster openers and flake blends on the floor at Main Street, which matters when a three-door elevation is the largest visual decision on the front of the house.
Mansfield, TX
Tarrant County · 76,000
Two jobs run here at once. The 1998 to 2008 subdivisions are replacing original springs, rollers and openers on schedule, and the acreage east of town needs 10-foot and 12-foot-tall doors with jackshaft operators for shops and RV bays.
Plano, TX
Collin County · 290,000
The 1970s and 1980s stock is on its third round of hardware. Openers from that era have no photo eyes and no rolling code, and the original 7-foot doors sit low over the trucks and SUVs parked under them now, so header height comes up on almost every quote.
Southlake, TX
Tarrant County · 32,000
Southlake buys on appearance and quiet operation. Wood-clad and full-view aluminum doors paired with jackshaft openers keep the ceiling clear and the noise down, and every specification clears architectural review before we build it.
Every city we serve
Not sure if you are in our area?
Call (817) 381-6173. If we do not cover it, we will tell you straight rather than waste your time.