Plano, Texas
Garage Floor Coating in Plano, TX
518 Google reviews at 4.8 stars, and we are about 40 minutes from our Grand Prairie showroom. When you need a stained, dusting or pitted slab you are tired of looking at, we are already close.
Garage Floor Coating for Plano homeowners
Plano built in clear waves. East Plano near Los Rios is 1970s with two-car front-load garages and low headers, the 1980s belt around Willow Bend runs larger brick two-story homes, and West Plano and Legacy West added 2000s homes plus townhomes with rear-entry and tandem garages.
The 1970s and 1980s stock is on its third round of hardware. Openers from that era have no photo eyes and no rolling code, and the original 7-foot doors sit low over the trucks and SUVs parked under them now, so header height comes up on almost every quote.
Plano went from a farm town of about 18,000 in 1970 to roughly 290,000 today, and Legacy West brought Toyota, Liberty Mutual and JPMorgan campuses onto ground that was still prairie in the 1990s.
- Diamond grinding and moisture testing before a drop of coating goes down
- Polyaspartic systems that go down and cure in a single day
- Flake, metallic and solid color systems, with real samples in the showroom
What garage floor coating involves
This page covers garage floor coatings in Dallas-Fort Worth: the four systems we install, what each one costs per square foot, how the install actually runs, and which system fits your slab. Professional Garage Concepts has worked on DFW garages since 2001 and carries 518 Google reviews at 4.8 stars.
Most coating failures in this market are not a product problem. They are a preparation problem. A coating rolled onto an acid-etched or unground slab has almost nothing to grip, and the first 105-degree August afternoon with a hot tire parked on it pulls the coating up in sheets. Everything below is built around avoiding that.
Call (817) 538-7668 for a measured quote, or come see the samples in person at our Keller or Grand Prairie showroom. Flake blends and metallic panels look nothing like they look on a phone screen.
The four systems we install, and what each one is actually for
Nearly every residential garage floor in DFW ends up as one of four builds. They are not interchangeable. The right pick depends on your slab condition, how much sun the floor sees, whether you park hot vehicles on it, and what you want it to look like.
Polyaspartic vs epoxy: the honest comparison
Most coating companies in DFW now sell polyaspartic and attack epoxy to do it. That is half true. Polyaspartic is the better topcoat for a garage in Texas. Epoxy still does two jobs polyaspartic cannot do as well, and pretending otherwise costs customers money.
Straight pricing
Garage Floor Coating pricing in Plano
These are installed per square foot ranges for typical DFW residential garages. Slab condition moves the number more than anything else, so a floor needing moisture barrier primer, coating removal or heavy spall repair prices above these bands. We measure and quote in writing before any work starts.
Solid color system
$5 to $6per sq ft installed
Budget-conscious garages, storage spaces, and slabs in good condition where a clean single color is the goal.
- Full diamond grind to CSP 2 to 3 profile
- Crack and spall repair
- Pigmented base coat in your color
- Clear protective topcoat
- Cleanup and haul-off
Full flake broadcast with polyaspartic topcoat
$6 to $8per sq ft installed
The standard DFW residential garage. Hides slab imperfections, adds slip resistance, most floors installed in one day.
- Full diamond grind and joint detailing
- Crack, spall and pop-out repair
- Polyurea base coat
- Vinyl flake broadcast to refusal in your chosen blend
- Scrape and vacuum
- Clear polyaspartic topcoat, gloss or satin
Metallic epoxy system
from $12per sq ft installed
Showrooms, retail floors, collector garages and any floor meant to be a feature rather than a work surface.
- Full diamond grind and full slab repair
- Pigmented epoxy basecoat
- Hand-worked metallic pour, single or multi-color
- High-build clear topcoat in gloss or satin
- One-of-a-kind finish, quoted per floor
Typical two-car garage, all in
$2,200 to $4,500installed
A standard 400 to 550 square foot two-car garage with a sound slab, coated in flake or solid color.
- Everything from prep through topcoat
- Written quote before work starts
- Most jobs completed in one day
Answers
Garage Floor Coating in Plano: your questions
Still stuck? Call (817) 538-7668 and talk to someone who does this every day.
How fast can you get to Plano for garage floor coating?
We run same-day service to Plano in most cases, and we are roughly 40 minutes from our Grand Prairie showroom. Emergency calls are dispatched 24 hours a day. Call (817) 538-7668 and we will give you a real arrival window, not a vague promise.
Do you actually work in Plano, or just advertise there?
We work in Plano regularly and have since 2001. The 1970s and 1980s stock is on its third round of hardware. Openers from that era have no photo eyes and no rolling code, and the original 7-foot doors sit low over the trucks and SUVs parked under them now, so header height comes up on almost every quote.
What does garage floor coating cost in Plano?
Pricing in Plano matches our standard DFW pricing, with no travel surcharge. These are installed per square foot ranges for typical DFW residential garages. Slab condition moves the number more than anything else, so a floor needing moisture barrier primer, coating removal or heavy spall repair prices above these bands. We measure and quote in writing before any work starts. We confirm the exact number before any work begins.
Which Plano neighborhoods do you cover?
All of them. We work throughout Plano including Downtown Plano Arts District, Willow Bend, Legacy West, Deerfield, and every ZIP in the city (75023, 75024, 75025, 75074, 75075 and more). Collin County is core territory for us.
How much does a garage floor coating cost in Dallas-Fort Worth?
Garage floor coatings in DFW run $5 to $12 per square foot installed, and a typical two-car garage lands between $2,200 and $4,500. Flake systems price around $5 to $8 per square foot, and metallic epoxy starts near $12. Slab condition and repair needs move the number more than the coating itself.
How long does a garage floor coating take to install?
Most two-car garages are ground, repaired, coated and topcoated in a single day using a polyurea and polyaspartic system. You can walk on the floor that evening and park on it about 24 hours later. Epoxy systems take longer and need 5 to 7 days before vehicles return.
What is the difference between epoxy, polyaspartic, and a flake system?
Epoxy and polyaspartic are chemistries, and flake is a decorative layer that can go into either. Epoxy is rigid, thick-building, cheaper, and ambers in sunlight. Polyaspartic cures in hours, holds color under UV, and stays flexible. Flake is vinyl chip broadcast into the base coat for texture and appearance.
Will my garage floor coating peel from hot tire pickup?
Hot tire pickup happens when the bond between coating and concrete is weaker than a hot tire gripping the surface as it cools. A slab that has been diamond ground to a CSP 2 to 3 profile, properly primed, and fully cured before vehicles return does not lift. Acid-etched floors do.
Nearby
We also cover
Garage Floor Coating in Plano, handled today
Call (817) 538-7668 or send the form. Same business day response, and no travel surcharge for Plano.