Keller, Texas
Driveway Gate Repair in Keller, TX
518 Google reviews at 4.8 stars, and we are our Keller showroom is at 220 N Main Street, in Old Town Keller. When you need a gate stuck open, stuck shut, or an operator that died after a storm, we are already close.
Driveway Gate Repair for Keller homeowners
Keller built most of its current housing between 1995 and 2010 on half-acre and larger lots, with three-car garages standard and side-load bays common in Hidden Lakes and Marshall Ridge. Older Old Town property runs 1960s and 1970s with detached garages and metal shop buildings out back.
Keller homeowners can touch the door before they buy it. We keep Amarr sections, LiftMaster openers and flake blends on the floor at Main Street, which matters when a three-door elevation is the largest visual decision on the front of the house.
Our showroom sits at 220 N Main Street in Old Town, a block from Keller Town Hall, with Bear Creek Park and the Keller Pointe a few minutes down the road.
- LiftMaster, DoorKing and All-O-Matic operator service and board replacement
- Safety loop, photo eye and UL 325 compliance checks on every visit
- Hinge, post and track repair for gates moved by North Texas clay
What driveway gate repair involves
Professional Garage Concepts repairs automatic driveway gates across Dallas and Fort Worth, including the operator, the control board, the safety loops and photo eyes, the access control and the gate structure itself. We answer emergency gate calls 24 hours a day at (817) 538-7668. Working in this metroplex since 2001, 518 Google reviews at a 4.8 star average, International Door Association certified.
Almost every gate that stops working stops for a machinery reason, not a fence reason. The gate is usually fine. The board took a surge, the loop detector lost the loop, a limit switch drifted, the battery is finished, the gearbox stripped, or a photo eye is aimed at nothing. That is our trade. We have been diagnosing motors, boards, sensors and travel limits on powered openings in DFW since 2001.
If a fence company built your gate, that is normal here. Nearly every driveway gate in this market was sold by a fence contractor. When the machinery quits, call the people who service machinery.
What actually goes wrong with driveway gates in DFW
After more than twenty years of gate calls in this market, the failure list is short and repetitive. Roughly in order of how often we see it:
Operator failure: what fails and what we replace
A gate operator is a motor, a gearbox, a drive mechanism and a control board sitting in a weather box outdoors in Texas. It has a finite life, and how long that life runs comes down to whether the operator was sized correctly for the gate in the first place.
Straight pricing
Driveway Gate Repair pricing in Keller
We price the repair after diagnosis rather than over the phone, because the same symptom can be an inexpensive loop detector or a failed operator. What we will do on the phone is tell you which of those is more likely from what the gate is doing.
Diagnostic visit
Quoted before we dispatchper visit
A gate doing something nobody can explain
- Full electrical and mechanical diagnosis
- Board, receiver, limit, loop and photo eye testing as separate items
- Written findings with photos
- Repair price given on site before any work begins
- Entrapment protection test included
Common repairs, first visit
Quoted on siteparts and labor
Storm damage, loop faults, dead remotes, worn rollers and hinges
- Control board and radio receiver replacement
- Loop detector replacement, loop re-cut and re-seal
- Photo eye alignment or replacement
- Limit switch replacement and full travel reset
- Roller, hinge, guide and hardware replacement
Operator replacement
Quoted after sizinginstalled
A burned or undersized operator on a sound gate
- Operator sized to actual gate weight, leaf length and daily cycles
- LiftMaster, DoorKing or All-O-Matic
- Battery backup and surge protection
- Safety devices tested and brought to a UL 325 configuration
- Remotes, keypad codes and app users re-enrolled
When repair stops making sense
$4,500starting at, new gate installed
A bent or rusted gate on moving posts with a dead operator
- New gate sized to the opening
- New operator matched to the finished gate weight
- New footings sized for expansive DFW clay
- Full safety package with photo eyes and loops
- Access control set up and users enrolled
Answers
Driveway Gate Repair in Keller: your questions
Still stuck? Call (817) 538-7668 and talk to someone who does this every day.
How fast can you get to Keller for driveway gate repair?
We run same-day service to Keller in most cases, and we are our Keller showroom is at 220 N Main Street, in Old Town Keller. Emergency calls are dispatched 24 hours a day. Call (817) 538-7668 and we will give you a real arrival window, not a vague promise.
Do you actually work in Keller, or just advertise there?
We work in Keller regularly and have since 2001. Keller homeowners can touch the door before they buy it. We keep Amarr sections, LiftMaster openers and flake blends on the floor at Main Street, which matters when a three-door elevation is the largest visual decision on the front of the house.
What does driveway gate repair cost in Keller?
Pricing in Keller matches our standard DFW pricing, with no travel surcharge. We price the repair after diagnosis rather than over the phone, because the same symptom can be an inexpensive loop detector or a failed operator. What we will do on the phone is tell you which of those is more likely from what the gate is doing. We confirm the exact number before any work begins.
Which Keller neighborhoods do you cover?
All of them. We work throughout Keller including Old Town Keller, Hidden Lakes, Marshall Ridge, Bear Creek, and every ZIP in the city (76248, 76244). Tarrant County is core territory for us.
Why won't my automatic gate open?
The most common causes are a failed control board after a power surge, a dead battery in a DC or solar operator, a tripped safety device holding the gate, a drifted limit switch, or a lost signal from a keypad or remote. Diagnosis starts at the power supply and works forward through the board, the limits and the safety circuit.
Why does my gate open but not close?
A gate that opens but refuses to close is almost always a safety device fault rather than a motor problem. Gate operators are built to fail safe, so a shorted safety loop, a failed loop detector, a misaligned photo eye or a damaged safety edge will stop the closing cycle while the opening cycle still works normally. A disabled timer-to-close setting produces the same complaint.
How much does driveway gate repair cost in Dallas?
Gate repair cost depends entirely on what failed. A loop detector or a photo eye is a small part. A control board is a moderate one. A burned operator is a replacement rather than a repair. We diagnose on site, give you the price before any work starts, and tell you on the phone which of those is most likely from the symptom you describe.
Can you fix a gate that a fence company installed?
Yes. Nearly every driveway gate in Dallas Fort Worth was sold by a fence contractor, and we service them regardless of who built them or what brand of operator is on the post. What normally fails is the operator, control board, loop detector, photo eye or access control, which is machinery work rather than fence work.
Nearby
We also cover
Driveway Gate Repair in Keller, handled today
Call (817) 538-7668 or send the form. Same business day response, and no travel surcharge for Keller.